Hot Air Stove saves the heat when drying the casting surface

Sıcak Hava Sobası döküm kurutma sobası

Kategoriler: Dökümhane Aksesuarları, Döküm ürünleri

Tanım
Sorgu

Tanım

Sıcak Hava Sobası döküm kurutma sobası

Hot Air Stove can meet the requirements of modern casting technology,andbecomes the preferred equipment for casting drying,maintaining the hot state of casting anddehumidifying.

Performance characteristics:

It saves the heat when drying the surface of the casting mould and the sand box without heating.It also

saves the drying time of the sand mould and the mud core.

Hot air stove heating outwards from the mould cavity under certain pressure can not only accelerate the

drying speed,but also make all parts of sand cores and parts of sand flling,sealing mud,asbestos rope

fully dry,maintain a certain amount of heat,make the sand cores out of gas smoothly,conducive to pouring exhaust.

Because the thermal work equivalent air is a continuous flow of hot ai,because the various heating surfaces in the cavity are very uniform,the

temperature difference is small,the sand mold and mud core will not deform and crack,so that the quality of casting casting is guaranteed.

Hot air stove can be controlled automatically in normal operation.The whole heating process is from low temperature to high temperature step by step,and the suitable temperature in the mould cavity can be controlled according to the requirements of pouring process to ensure the pouring quality.

Hot air stove operation is simple,random lifting and moving will not occupy the production site,no pollution to the working environment during baking,no residue in the casting cavity,and reduce the labor intensity of workers.

Note:Products of various specifications can be provided according to customer’s requirements.

Traditional methods for mold baking mould for foundry, an extended box-type electric furnace, diesel-powered Grill. This method of baking is the sand mold is placed in the baking mould heating furnace, hot place gradually from within the sand penetrated the outer wall layer is dry. Because of this method of heating the sand cast appearance parts that must not be heated at the same time, such as heating, both heating time, and wasted energy.

While this heating mode does not enable the cavity, various sections within the sand cement sand and sand filling, sealing PuTTY, Shi Miansheng fully dry, as well as sand and mud core bad vent.

Sand and mud core cracks, thus affecting the casting quality of castings. In particular this heating method for large cast in boxes, cores in mold oven kiln baked, cool in distribution boxes in the process result in the return of damp, cannot cast meets the necessary requirements. In order to address these challenges, my factory technical force, the advantages of collecting a variety of baking furnaces, research, development of modern casting technology requires ZTK series casting drying furnace, casting bake mode, the maintenance of mould dehumidification and thermal moisture removing device of choice